Network Management Software

INDUSTRIAL ETHERNET SWITCHES

Managed Ethernet Switches

FR-7M3208L

Industrial L2+ Managed 8-port 10/100/1000Base-TX + 2-port 100/1000Base-SFP Ethernet Switch with Redundant DC Power Inputs

Engineered for reliability in the most demanding industrial environments, the Layer 2+ Managed Industrial Ethernet Switch seamlessly integrates dual power input design to ensure uninterrupted connectivity. Enclosed in a rugged IP40-rated housing that can be easily mounted on DIN rails or walls, it excels in harsh settings where durability and uptime are critical. With its exceptional operating temperature range of -40 to 75°C, this switch is built to withstand extreme conditions.

Protected by hardware warranty

Advance replacement. Global coverage.

Protected by hardware warranty

Advance replacement. Global coverage.

  • 8×10/100/1000BASE-T Gigabit Ethernet RJ45
  • 2×100/1000BASE-X SFP Slots
  • Full gigabit L2+ management, easy to manage the network by CLI/WebGUI/NMS.
  • Build up a redundant industrial network with STP/RSTP/MSTP/ERPSv2
  • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
  • Traffic Classification Based on IEEE 802.1p, CoS, WRR, and Strict Mode
  • SNMPv1/v2c/v3 for different levels of network management
  • Wide operating temperature range -40 to 75℃ (-40 to 167℉)
Hardware Specifications
Product
FR-7M3208L
Standards
IEEE 802.1p, IEEE 802.1Q, IEEE 802.3z, IEEE802.3ad, IEEE 802.1x
Copper Ports
8×10/100/1000BASE-T RJ45 Auto-MDI/MDI-X (Port 1-8)
Fiber Ports
Default: 2×100/1000BASE-X SFP Slots (Port 9 and Port 10)
Console
1x RJ45-to-RS232 Serial Port (115200)
Connector
1 removable 6-contact terminal blocks; Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm
Alarm
One relay output for power failure, Alarm relay current carry ability: 1A@24V DC
RAM
128Mbyte
FLASH
32MByte
Reset Button
<5 sec: System Reboot; >10 sec: Factory Default
Surge Protection
±6kV DC, ±6kV RJ45
Enclosure
IP40 aluminum case
Installation
DIN-Rail and Wall-mount
Dimension
138 x 108 x 49mm
Weight
660g (Bare weight), 860g (With package)
Switching
Switch Architecture
Store-and-Forward
Switch Fabric
36Gbps/non-blocking
Forwarding Rate
11.9Mpps (64-byte packet size)
Packet Buffer Size
4 Mbits
Maximum Packet Length
10K bytes
MAC Address Table
8K entries, automatic source address learning and aging
Flow Control
IEEE 802.3x pause frame for full duplex, Back pressure for half duplex
Power Supply
Input Voltage
DC9-56V
Power Consumption
10 Watts Max
Environmental
Operating Temperature
-40℃~75℃ (-40 to 167 ℉)
Storage Temperature
-40℃~85℃ (-40 to 185 ℉)
Operating Humidity
5%~95% (non-condensing)
MTBF
907,476 hours @ Telcordia SR-332 Standard
Heat Dissipation
34 BTU/h
Cooling
Passive Cooling, Fanless Design
Noise Level
0 dBA

AVAILABLE MODELS

Industrial L2+ Managed 8-port 10/100/1000Base-TX + 2-port 100/1000Base-SFP Ethernet Switch with Redundant DC Power Inputs

TypeVersionRelease Date
Datasheet
FR-7M3208L Datasheet
Datasheet
4.0
11/05/2026
Manual
WebGUI Network Management User Manual
Manual
2.0
Manual
7 Series Quick Start Guide
Manual
2.0
Manual
Quick Start Guide
Manual
Tech Note
Tech Note _STP
Tech Note

Dimensions (W×D×H)

10 Port Industrial Ethernet Switch
10 Port Industrial Ethernet Switch
10 Port Industrial Ethernet Switch
10 Port Industrial Ethernet Switch
Network Management
Network Management

Send Enquiry

Our team typically responds within 1 business day.

FR-7M3208L

8-port Gigabit-TX + 2-port Gigabit-SFP


Your data is handled in accordance with our Privacy Policy.

INDUSTRIAL ETHERNET SWITCHES

4-port Gigabit-TX + 2-port Gigabit-SFP

POE SOLUTIONS

4-port Gigabit-TX (PoE++) + 2-port Gigabit-SFP

POE SOLUTIONS

4-port Gigabit-TX (PoE+) + 2-port Gigabit-SFP