Network Management Software

POE SOLUTIONS

24V PoE Products

FR-7M3416P-24V

Industrial L2+ Managed 16-port 10/100/1000Base-TX (PoE+) + 4-port 100/1000Base-SFP Ethernet Switch with Redundant 24VDC Power Inputs

Engineered for reliability in the most demanding industrial environments, the Layer 2+ Plus Managed Industrial Ethernet Switch seamlessly integrates dual power input design to ensure uninterrupted connectivity. Enclosed in a rugged IP40-rated housing that can be easily mounted on DIN rails or walls, it excels in harsh settings where durability and uptime are critical. With its exceptional operating temperature range of -40 to 75°C, this switch is built to withstand extreme conditions.

Protected by hardware warranty

Advance replacement. Global coverage.

Protected by hardware warranty

Advance replacement. Global coverage.

  • 16×10/100/1000BASE-T Gigabit Ethernet RJ45
  • 4×100/1000BASE-X SFP Slots
  • Optionally support IEEE 802.3 af/at Power Over Ethernet Standard
  • Full gigabit L2+ management, easy to manage the network by CLI/WebGUI/NMS.
  • Build up a redundant industrial network with STP/RSTP/MSTP/ERPSv2
  • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
  • Traffic Classification Based on IEEE 802.1p, CoS, WRR, and Strict Mode
  • SNMPv1/v2c/v3 for different levels of network management
  • Wide operating temperature range -40 to 75℃ (-40 to 167℉)
Hardware Specifications
Product
FR-7M3416P-24V
Copper Ports
16×10/100/1000BASE-T RJ45 Auto-MDI/MDI-X (Port 1-16)
Fiber Ports
4×100/1000BASE-X SFP Slots (Port 17-20)
Console
1x RJ45-to-RS232 Serial Port (115200)
Connector
1 removable 6-contact terminal blocks; Pin 1/3 for Power 1, Pin 4/6 for Power 2
Alarm
One relay output for power failure, Alarm relay current carry ability: 1A@24V DC
RAM
128Mbyte
FLASH
32MByte
Reset Button
<5 sec: System Reboot; >10 sec: Factory Default
Surge Protection
±6kV DC, ±6kV RJ45
Enclosure
IP40 aluminum case
Installation
DIN-Rail and Wall-mount
Dimension
160 x 132 x 70mm
Weight
1000g (Bare weight), 1300g (With package)
Switching
Switch Architecture
Store-and-Forward
Switch Fabric
56Gbps/non-blocking
Forwarding Rate
29.76Mpps (64-byte packet size)
Packet Buffer Size
4 Mbits
Maximum Packet Length
10K bytes
MAC Address Table
8K entries, automatic source address learning and aging
Flow Control
IEEE 802.3x pause frame for full duplex, Back pressure for half duplex
PoE & Power Supply
PoE Ports
Port 1 to 16 IEEE802.3 af/at
PoE Power Supply Type
End-span
Power Supply Pin
1/2(+), 3/6(-)
Max Power Per Port
30W
Input Voltage
DC24V
Power Consumption
15 Watts Max (without PoE load)
Total PoE Output
Max 105W@24VDC; Max 385W@dual 48VDC inputs
Environmental
Operating Temperature
-40℃~75℃ (-40 to 167 ℉)
Storage Temperature
-40℃~85℃ (-40 to 185 ℉)
Operating Humidity
5%~95% (non-condensing)
MTBF
907,476 hours @ Telcordia SR-332 Standard
Heat Dissipation
51 BTU/h (non-PoE mode); 425 BTU/h (with 105W PoE load)
Cooling
Passive Cooling, Fanless Design
Noise Level
0 dBA
Software Features
Port Configuration
Port (Admin Status) disable/enable; Copper Port: Auto-negotiation 10/100/1000Mbps full and half duplex mode selection; Fiber Port: 100M/1000M speed selection; Flow Control disable/enable; Power saving (EEE) disable/enable; Each port description
Port Status
Displays each port's speed duplex mode, link status, flow control status, auto negotiation status, fiber port information, port traffic
Port Mirroring
Source Ingress/Egress Port/Both, Many-to-1 monitor
VLAN
Up to 4K VLAN groups, out of 4094 VLAN IDs; IEEE 802.1Q tag-based VLAN; IEEE 802.1AD Q-in-Q tunneling (Double VLAN); GVRP (Generic VLAN Registration Protocol)
Link Aggregation
IEEE 802.3ad LACP/Static trunk; supports 6 trunk groups with 4 ports per trunk
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol; IEEE 802.1w Rapid Spanning Tree Protocol; IEEE 802.1s Multiple Spanning Tree Protocol
Multicast
Dynamic/Static Multicast groups; IGMP Snooping v1,2,3; Port-based IGMP Snooping Fast Leave; IGMP Querier
Rate Limitation
Per port rate limitation; Ingress: 16-1000000 kbps / Egress: 16-1000000 kbps
Ring
ITU-T G.8032 ERPS, recovery time < 10ms
QoS
Traffic classification based, strict priority and WRR; 8-level priority for switching (port number, 802.1p priority, 802.1Q VLAN tag, DSCP/TOS field in IP packet)
ACL
IP-based ACL/MAC-based ACL, based on MAC Address, IP Address, Ethertype, Protocol Type, VLAN ID, DSCP, 802.1p Priority
Security
Port Security, Static MAC address, IEEE 802.1x port-based network access control, RADIUS authentication, DHCP Snooping, DHCP option 82
Layer 3 Functions
Max. 8 VLAN interfaces; Max. 32 routing entries; IPv4 software static routing
Basic Management Interface
Console, Telnet, Web browser, SNMPv1/v2c
Secure Management Interface
SSHv2, TLSv1.2, SNMPv3, SNMP MIB
System Management
Firmware upgrade by HTTP protocol through Ethernet network; configuration upload/download through HTTP; remote syslog, system log; LLDP protocol, SNTP; alarm (relay, LED, temperature, trap, power)
PoE Management
PoE port status monitoring; total PoE power budget control; PoE usage threshold and temperature threshold; PoE port priority; PoE mode (PoE/PoE+); PD reboot (zero traffic duration); PoE schedule (absolute/periodic mode)

AVAILABLE MODELS

Industrial L2+ Managed 16-port 10/100/1000Base-TX (PoE+) + 4-port 100/1000Base-SFP Ethernet Switch with Redundant 24VDC Power Inputs

TypeVersionRelease Date
Datasheet
FR-7M3416P-24V Datasheet
Datasheet
V2.1
16/06/2026
Manual
WebGUI Network Management User Manual
Manual
Manual
7 Series Quick Start Guide
Manual

Dimensions (W×D×H)

Send Enquiry

Our team typically responds within 1 business day.

FR-7M3416P-24V

16-port Gigabit-TX (PoE+) + 4-port Gigabit-SFP Ethernet Switch


Your data is handled in accordance with our Privacy Policy.

POE SOLUTIONS

8-port Gigabit-TX (PoE+) + 4-port Gigabit-SFP with Redundant 24VDC

POE SOLUTIONS

8-port Gigabit-TX (PoE+) + 2-port Gigabit-SFP with Redundant 24VDC Power Inputs

POE SOLUTIONS

8-port Gigabit-TX (PoE+) with Redundant 24VDC Power Inputs